KM-2FLP300300 Collimated Backlight DC 24V
|
HIFLY collimated backlight consists of uniformly distributed LED light-emitting units. Support customized color, wavelength, luminous size, etc. |
|
● Luminous size: 300mm*300mm. |
|
● Brightness level 255, connected to the controller can be adjusted. |
|
● Life span:30000 hours for red light and 30000 hours for white light. ● Suitable for high-precision detection such as contour detection, Edge breakage detection and Liquid height detection, etc. |
| Model | Luminous size(mm) | Color | Voltage(V) | Power(W) | Boundary dimension(mm) | LED Type | M3 nut slot | Bottom side installation | Luminous size expansion | ||||
| Red | Blue/White/Green | Long | Wide | High | SMD | ||||||||
| KM-2FLP5050 | 50x50 | Red | Blue/White/Green | 24V | 2.9 | 2.9 | 64 | 64 | 22.5 | √ | √ | √ | The luminous size can be multiplied ndividually: 10050,12060,14070, 16080,200100,240120. |
| KM-2FLP6060 | 60x60 | Red | Blue/White/Green | 24V | 4.3 | 3.6 | 74 | 74 | 22.5 | √ | √ | √ | |
| KM-2FLP7070 | 70x70 | Red | Blue/White/Green | 24V | 5.0 | 5.4 | 84 | 84 | 22.5 | √ | √ | √ | |
| KM-2FLP8080 | 80x80 | Red | Blue/White/Green | 24V | 6.5 | 6.5 | 94 | 94 | 22.5 | √ | √ | √ | |
| KM-2FLP9090 | 90x90 | Red | Blue/White/Green | 24V | 8.6 | 7.6 | 104 | 104 | 22.5 | √ | √ | √ | |
| KM-2FLP100100 | 100x100 | Red | Blue/White/Green | 24V | 9.7 | 11.5 | 114 | 114 | 22.5 | √ | √ | √ | |
| KM-2FLP120120 | 120x120 | Red | Blue/White/Green | 24V | 11.9 | 13.0 | 134 | 134 | 22.5 | √ | √ | √ | |
| KM-2FLP150150 | 150x150 | Red | Blue/White/Green | 24V | 11.9 | 13.7 | 164 | 164 | 23.5 | √ | √ | √ | Large size |
| KM-2FLP200150 | 200x150 | Red | Blue/White/Green | 24V | 15.1 | 17.5 | 214 | 164 | 23.5 | √ | √ | √ | |
| KM-2FLP200200 | 200x200 | Red | Blue/White/Green | 24V | 23.8 | 22.5 | 214 | 214 | 23.5 | √ | √ | √ | |
| KM-2FLP250125 | 250x125 | Red | Blue/White/Green | 24V | 13.0 | 16.8 | 264 | 139 | 23.5 | √ | √ | √ | |
| KM-2FLP250250 | 250x250 | Red | Blue/White/Green | 24V | 25.9 | 33.7 | 264 | 264 | 23.5 | √ | √ | √ | |
| KM-2FLP300150 | 300x150 | Red | Blue/White/Green | 24V | 19.4 | 27.5 | 314 | 164 | 23.5 | √ | √ | √ | |
| KM-2FLP300200 | 300x200 | Red | Blue/White/Green | 24V | 30.2 | 34.9 | 314 | 214 | 23.5 | √ | √ | √ | |
| KM-2FLP300300 | 300x300 | Red | Blue/White/Green | 24V | 47.5 | 54.9 | 314 | 314 | 23.5 | √ | √ | √ | |
| KM-2FLP400200 | 400x200 | Red | Blue/White/Green | 24V | 38.9 | 44.9 | 414 | 214 | 23.5 | √ | √ | √ | |
| KM-2FLP400300 | 400x300 | Red | Blue/White/Green | 24V | 60.5 | 69.9 | 414 | 314 | 23.5 | √ | √ | √ | |
| KM-2FLP400400 | 400x400 | Red | Blue/White/Green | 24V | 77.8 | 89.9 | 414 | 414 | 23.5 | √ | √ | √ | |
| Please contact us learn more models ! | |||||||||||||
| Model | KM-2FLP300300 | |||
| Category | Collimated backlight | |||
| LED Type | SMD | |||
| Color | red | white | blue | green |
| Wavelength | 620-635nm | — | 465-470nm | 525-530nm |
| Color-temperature | — | 6000-6500K | — | — |
| Power | 47.5Wmax. | 54.9Wmax. | 54.9Wmax. | 54.9Wmax. |
| Input Volt | DC24Vmax. | |||
| Cable length | 0.5m | |||
| Terminal Plug | Flat head 3PIN2 pin | |||
| Connector Definition | 1:positive(+)red; 2:leave empty; 3:negative(-)black. | |||
| Shell Material | Aluminum Alloy（Oxidative blackened surface） | |||
| Cooling | Naturalair cooling | |||
| Dimensions | L314mm*W314mm*H23.5mm | |||
| Shell Hardness Parameters | Static load 230N±10N,time 5 minutes contact area:diameter 30MM Energy level:5J elements: steel ball diameter 50MM,500g±25g |
|||
| ElectricalIn Sulation Capacity | DC500V Insulation resistance>20 megohms | |||
| Pressure Resistance Requirements | AC1000 V10mA/5S | |||
| Flammability Rating | IEC60707 | |||
| Operating Temperatureand Humidity | Temperature:0 to 50ºC,Humidity:20% to 85%RH(non-condensing) | |||
| Lifespan | Under our specified conditions of use,30000 hours for red light and 30000 hours for white light,the brightness is reduced to 50% of the factory value |
|||
| Warranty Period | Under the conditions of use specified by the company,the warranty is two years from the date of shipment,and within two years,if there is a failure problem,it can be repaired or replaced free of charge | |||
| Value Added Services | One year free technical support | |||
| Brightness Controller (optional) | 1.Analog Controller 2.Digital Controller | |||
| Matingcable (optional) | 1.Light source extension cable 2.Connector adapter cable | |||
Dimension measurement of metal parts
Place the detected metal part above the collimated backlight. The part contrasts sharply with the white background, and the prominent black edge is the size of the part.
Wafer surface defect detection
The quality of a wafer is affected by the defects that occur during production. While some small defects cannot be observed by the naked eye.Collimated backlight has strong illumination and no shadow, which can better observe the product defects.
Large-area circuit board component detection
When detecting large-area circuit board components, the luminous area of other light sources cannot completely cover the measured object. The backlight has a large luminous area, which is more suitable for the illumination of large-area circuit board components detection.
Glass bottle diameter measurement
The glass bottle is transparent, and the parallel backlight light directly shines on the bottle can clearly outline the outline of the bottle. It provides the basis for diameter measurement.
Q1. Can I have a sample order for Collimated Backlight?
A: Yes, sample orders and any orders are acceptable.
Q2. What is the lead time?
A: 3-5 days for sample/small(<50pcs) orders, 1-2 weeks for bulk buying (>50pcs).
Q3. What's your MOQ for the Collimated Backlight?
A: The MOQ is 1pcs.
Q4. What's your shipment term and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 5-7 days by air. Shipping by sea is also acceptable.
Q5. How to place an order for Collimated Backlight?
A: 1. Confirm parameters such as FOV and WD;
2. Confirm the shape, state, material and color of the detected object;
3. Confirm the order and quote;
4. Pay orders and arrange production;
5. Check the product and arrange delivery.
Q6. Do you support private labels?
A: Yes, we do.
Q7: How long is your product warranty?
A: We offer 2-5 years warranty for our products.
Q8: How do you deal with the faulty products?
A: 1, Our products are produced in strict quality control system with a 0.2% defective rate.
2, If non-artificial damage, dysfunction or errors happen during the warranty period, customers can go for repair, replacement or partial/full refund.
2FLP300300（Specifications & Drawings）.pdf
download
EN
