KM-CO2.0-3535 Standard Coaxial Light DC 24V
|
HIFLY coaxial light consists of uniformly distributed LED light emitting units and special lenses. Support customized color, wavelength, luminescent surface size, etc. |
|
● Luminescent surface size: 35mm x 35mm. |
|
● Brightness level 255, connected to the controller can be adjusted. |
|
● Life span:30000 hours for red light and 30000 hours for white light. ● Suitable for Mark point positioning, QR code detection,uneven surfaces and Highly reflective object scratch detection, etc. |
| Model | Luminous size(mm) | Color | Voltage(V) | Power(W) | Boundary dimension(mm) | LED Type | |||
| Red | Blue/White | Length | Width | Height | SMD | ||||
| KM-3CO2020 | 20x20 | Red/Blue/White | 24V | 2.1 | 2.8 | 50 | 28 | 28 | √ |
| KM-3CO3030 | 30x30 | Red/Blue/White | 24V | 3.5 | 4.0 | 65 | 38 | 38 | √ |
| KM-3CO4040 | 40x40 | Red/Blue/White | 24V | 5.0 | 6.0 | 78 | 48 | 50 | √ |
| KM-3CO6060 | 60x60 | Red/Blue/White | 24V | 7.5 | 11.0 | 100 | 70 | 70 | √ |
| KM-CO2.0-3535 | 35x35 | Red/Blue/White | 24V | 2.6 | 3.4 | 70 | 44 | 47.5 | √ |
| KM-CO2.0-5050 | 50x50 | Red/Blue/White | 24V | 4.5 | 5.7 | 100 | 60 | 67.5 | √ |
| KM-CO2.0-7070 | 70x70 | Red/Blue/White | 24V | 6.0 | 11.0 | 110 | 82 | 84.5 | √ |
| KM-3COG3030 | 30x30 | Red/Blue/White | 24V | 7.0 | 9.0 | 79.5 | 38 | 38 | √ |
| KM-3COG4040 | 40x40 | Red/Blue/White | 24V | 13.0 | 14.5 | 95 | 48 | 50 | √ |
| KM-3COG6060 | 60x60 | Red/Blue/White | 24V | 27.5 | 18.0 | 127 | 70 | 70 | √ |
| Please contact us learn more models ! | |||||||||
| Model | KM-CO2.0-3535 | ||
| Category | Coaxial light | ||
| LED Type | SMD | ||
| Color | red | white | blue |
| Wavelength | 620-635nm | — | 465-470nm |
| Color-temperature | — | 6000-6500K | — |
| Power | 2.6Wmax. | 3.4Wmax. | 3.4Wmax. |
| Input Volt | DC24Vmax. | ||
| Cable length | 0.5m | ||
| Terminal Plug | Flat head 3PIN2 pin | ||
| Connector Definition | 1:positive(+)red; 2:leave empty; 3:negative(-)black. | ||
| Shell Material | Aluminum Alloy（Oxidative blackened surface） | ||
| Cooling | Naturalair cooling | ||
| Dimensions | L70mm x W44mm x H47.5mm | ||
| Shell Hardness Parameters | Static load 230N±10N,time 5 minutes contact area:diameter 30MM Energy level:5J elements: steel ball diameter 50MM,500g±25g |
||
| ElectricalIn Sulation Capacity | DC500V Insulation resistance>20 megohms | ||
| Pressure Resistance Requirements | AC1000 V10mA/5S | ||
| Flammability Rating | IEC60707 | ||
| Operating Temperatureand Humidity | Temperature:0 to 50ºC,Humidity:20% to 85%RH(non-condensing) | ||
| Lifespan | Under our specified conditions of use,30000 hours for red light and 30000 hours for white light,the brightness is reduced to 50% of the factory value |
||
| Warranty Period | Under the conditions of use specified by the company,the warranty is two years from the date of shipment,and within two years,if there is a failure problem, it can be repaired or replaced free of charge |
||
| Value Added Services | One year free technical support | ||
| Brightness Controller (optional) | 1.Analog Controller 2.Digital Controller | ||
| Matingcable (optional) | 1.Light source extension cable 2.Connector adapter cable | ||
Stamping parts defect detection
The stamping parts are colored and reflective, which has a large interference to the detection. When the coaxial light shines directly on the detected object, the defect area appears darker, so that the product defect is identified.
Light bulb base glue detection
Product variety of material number, detection system position is fixed. The production line sends the bulb base to the designated position to take pictures and apply glue at a fixed point. Then detect the gluing situation and eliminate the unqualified products.
Product sticker edge detection
Product sticker surface reflection, general light source lighting effect is not good. The coaxial light source has uniform light and anti-reflection, detection effect is well.
Food packaging character detection
The surface of food packaging has color and reflection, which has great interference to the detection. When the coaxial light is directly illuminated on the detected object, the character and the background produce a color difference, so that the character on the product packaging is recognized.
Q1. Can I have a sample order for Coaxial Light?
A: Yes, sample orders and any orders are acceptable.
Q2. What is the lead time?
A: 3-5 days for sample/small(<50pcs) orders, 1-2 weeks for bulk buying (>50pcs).
Q3. What's your MOQ for the Coaxial Light?
A: The MOQ is 1pcs.
Q4. What's your shipment term and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 5-7 days by air. Shipping by sea is also acceptable.
Q5. How to place an order for Coaxial Light?
A: 1. Confirm parameters such as FOV and WD;
2. Confirm the shape, state, material and color of the detected object;
3. Confirm the order and quote;
4. Pay orders and arrange production;
5. Check the product and arrange delivery.
Q6. Do you support private labels?
A: Yes, we do.
Q7: How long is your product warranty?
A: We offer 2-5 years warranty for our products.
Q8: How do you deal with the faulty products?
A: 1, Our products are produced in strict quality control system with a 0.2% defective rate.
2, If non-artificial damage, dysfunction or errors happen during the warranty period, customers can go for repair, replacement or partial/full refund.
KM-CO2.0-3535（Specifications & Drawings）.pdf
download
EN
